Bosch VI3 RNM Renault Nissan Mitsubishi 100% Original Vehicle Interface, Renault Nissan Mitsubishi Diagnostic Coding Programming

Bosch VI3 RNM Renault Nissan Mitsubishi 100% Original Vehicle Interface

What’s in The Box:
1 x RNM VCI Alliance Unit
2 x Wi-Fi Dongles USB
1 x 3m Rugged USB Cable
1 x 2m 16 Pin DLC Cable
1 x Instructions & Quick Start Guide
​1 x USB RNM VCI Manager

Vehicle Interface
Wired USB High-Speed Client Port(480 Mbps)
Wireless 802.11b/g/n on USB Dongle
Bluetooth Version 2.0 EDR on USB Dongle
PROCESSOR SYSTEM
Microprocessor Type I.MX6 Processor
Clock Speed 800 MHz
RAM SDRAM: 1 Gbyte DDR3:
ROM NAND Flash: 512 Mbytes
​Mass Storage 8 Gbytes Micro SD Card
USER INTERFACE
LED 4 LED’s – two LED’s are triple color
Audio Beeper (software frequency controlled)
Switch Recovery switch (for restoration of fail-safe software)
POWER
Vehicle From vehicle battery via DLC
External USB power
MECHANICAL CHARACTERISTICS
Size 171mm x 118mm x 41mm
Weight 240 grams
POWER SUPPLY
From the vehicle battery using the diagnosis connection cable
or from the PC using a connected USB cable.
Caution:
The diagnostic connector of the vehicle must be protected
by a fuse with a max. rating of 6 amps / 32 volts. 8 V to 28 V
Power Supply 750 mA
Operating Temperature -20 °C – +70 °C
Storage Temperature -40 °C – +80 °C
Humidity at 25 °C 30% – 95%
Maximum operating altitude 4000 m
Degree of protection with the diagnostic connection cable
not connected IP30
Degree of protection with the diagnostic connection cable
connected according to IEC 60529 IP 54, cat. 2
Degree of contamination 2
DIAGNOSIS CONNECTION CABLE J1962 (ISO 15031-3)
Voltage resistance DLC 26 Pin 18 V, CAT 0